M7CL V3 Firmware V3.01 (Previous version)
M7CL V3 Compatibility
Please make sure to use the appropriate versions of firmware and software, referring to the following compatibility charts. Using an unsupported combination may result in malfunction.
Main Revisions and Enhancements
Known problem
- Regarding M7CL-32/48, the following problem has been found. We are currently preparing the fixed firmware.
- Audio signal may not be output properly(muted etc.) when the output port delay is used on Slot 1 and Slot 2.
The problem does not occur when used on Slot 3.
New Features
- The following VCM effects that can be mounted in RACK 5-8 have been added in the GEQ/EFFECT page in the VIRTUAL RACK window:
- COMP276, COMP276S, COMP260, COMP260S, EQUALIZER601, OPENDECK - The send-destination bus can now be selected by pressing the [MIX/MATRIX] encoder in SENDS ON FADER mode.
- The Stage Box Data Conversion function has been added.
The system data using external HA previously was not compatible with that using internal HA; however, now they can be converted in the following combinations:
- "M7CL using External HA via slot" and "M7CL using Internal HA"
- "M7CL-48ES" and "M7CL using External HA via slot"
"M7CL-48ES" and "M7CL using Internal HA" are compatible and there is no need to convert. - The version of the firmware which the file was saved with is now displayed in the SAVE/LOAD popup window.
- ST IN 1L-4R can now be assigned to INPUT TO TALKBACK for the input port.
- M7CL EDITOR CONTROL - SENDS ON FADER can now be assigned to the user-defined keys.
Improvements
- The following "recall safe" parameters can now be set individually in the RECALL SAFE MODE window:
- Input Channels : INPUT PATCH, INSERT PATCH, INSERT, DIRECT OUT
- Output Channels : OUTPUT PATCH, INSERT PATCH, INSERT - The +48V indicators have been added in the INPUT CH LIBRARY popup window, so that the +48V settings can be checked before recalling.
- The INPUT PATCH and OUTPUT PATCH buttons were renamed INPUT PORT PATCH and OUTPUT PORT PATCH respectively in the PATCH/NAME page in the GLOBAL PASTE window, and also the categories of those parameters have been rearranged.
- The pasted insert-out is also now automatically patched to the GEQ when performing the Global Paste function with INPUT PORT PATCH on while a GEQ is inserted into an INPUT channel.
- The pasted insert-in is also now automatically patched to the GEQ when performing the Global Paste function with OUTPUT PORT PATCH on while a GEQ is inserted into an INPUT channel.
- The insert of an inserted channel is now turned OFF automatically when the GEQ patch is defeated by pasting the patch information concerning insertion in the Global Paste function.
- The initial effect types of RACK 5 and RACK 6 have been changed to REV-X HALL and REV-X ROOM respectively in the GEQ/EFFECT page in the VIRTUAL RACK window.
- The initial effect types of RACK 5 and RACK 6 have been changed to REV-X HALL and REV-X ROOM respectively in the GEQ/EFFECT page in the VIRTUAL RACK window.
- Initial settings of user-defined keys were changed as follows:
- [1] SENDS ON FADER - MIX ON FADER
- [2] SENDS ON FADER - MATRIX ON FADER
- [3]-[8] PAGE CHANGE - PAGE BOOKMARK
- [11] HOME - MOMENTARY
- [12] TALKBACK - TALKBACK ON - UNLATCH - The parameter PRE FADER SEND POINT in the MATRIX BUS SETUP page in the MATRIX BUS SETUP window was renamed PRE FADER SEND POINT for Input Channels.
- A message directing the user to close the startup menu screen or select a mode now appears when the initialization of the internal memory is complete.
Supplementary Information
- Some parameters included in OUTPUT for Global Paste operations differ between those when ALL is selected and those when WITH MIX SEND/WITH MATRIX SEND is selected. When ALL is selected, this includes SIGNAL TYPE (STEREO/MONOx2) and PAN LINK but excludes SEND PAN (from input channels). When WITH MIX SEND/WITH MATRIX SEND is selected, this includes SEND PAN but excludes SIGNAL TYPE and PAN LINK.
- When the Global Paste function is executed for scenes in which some input channels are linked, the copied parameters are pasted only to the input channels selected as the paste destination.
- When you load a file saved in M7CL V1 to an M7CL running firmware Version 3, the channel library data of the previous session remains accessible. When a V1 file is loaded to the M7CL V3 Editor, the channel library data of the previous session is cleared.
- If Administrator user logs in while the connection with the M7CL V3 Editor is online, the Preference settings for Guest will be updated only when you perform the Re-synchronization operation (not updated in real time).
Licencìa
ATTENTION
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").
BY DOWNLOADING OR INSTALLING THIS SOFTWARE OR OTHERWISE RENDERING IT AVAILABLE FOR YOUR USE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.
GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use the programs and data files composing the software accompanying this Agreement, and any programs and files for upgrading such software that may be distributed to you in the future with terms and conditions attached (collectively, “SOFTWARE”), only on a computer, musical instrument or equipment item that you yourself own or manage. While ownership of the storage media in which the SOFTWARE is stored rests with you, the SOFTWARE itself is owned by Yamaha and/or Yamaha’s licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions.
RESTRICTIONS
- You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
- You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
- You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
- You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
- You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.
- Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
- Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
- The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.
TERMINATION
If any copyright law or provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.
DOWNLOADED SOFTWARE
If you believe that the downloading process was faulty, you may contact Yamaha, and Yamaha shall permit you to re-download the SOFTWARE, provided that you first destroy any copies or partial copies of the SOFTWARE that you obtained through your previous download attempt. This permission to re-download shall not limit in any manner the disclaimer of warranty set forth in Section 5 below.
DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided "AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
THIRD PARTY SOFTWARE
Third party software and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. If, in the written materials or the electronic data accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.
- Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
- Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
- Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.
U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein
GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.
COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of Yamaha.