Supports full matrix patching channel by channel except for the routing between Dante channels. You can also make routing between Mini-YGDAI slot channels including a return patch to the identical slot. The matrix patching will be edited from R Remote V3 application software or CL/QL series digital mixing consoles.
Yes. SRCs are located at the input and output of each Mini-YGDAI slot. They can be applied to the routing between slots as well as between a slot and Dante. If SRCs are enabled on both slots (or return patch to the identical slot), SRCs are applied twice. This would create a short additional delay to the audio, but will not cause any other inconvenience (such as added noise for example).
Yes. Install a Mini-YGDAI card which supports AES/EBU such as MY16-AE, and enable the SRC on the slot. In that case, 48kHz word clock for the SRC must be provided via the WORD CLOCK IN connector or 48kHz AES/EBU signals to channel 1/2 of the installed card.
Unfortunately not. Even if you turn on the SRC on the slot in which MY8-AE card is installed for example, the 96kHz AES/EBU inputs cannot be accepted either in double speed or double channel mode. In that case, a card that supports 96kHz will be necessary, such as MY8-AE96.