CL StageMix

Yamaha Smart Device Application CL StageMix

Aplicación de iPad para controlar y monitorear la consola de mezclas de la Serie CL.

CL StageMix proporciona control remoto para las funciones de la serie CL

CL StageMix proporciona control remoto para las funciones de la serie CL a través de una interfaz gráfica simple e intuitiva desde cualquier lugar dentro del rango inalámbrico. El software ha sido diseñado específicamente para permitir a los ingenieros ajustar las mezclas de los monitores desde las posiciones que ocupan los artistas en el escenario, controlando directamente los parámetros de la mezcla a través de un iPad en lugar de tener que depender de las instrucciones verbales de un segundo ingeniero.

El resultado son mejores mezclas en menos tiempo: una gran ventaja durante los tensos momentos de preparación antes del espectáculo. StageMix no proporciona control remoto a todos los parámetros de la serie CL, pero se centra en los requisitos para ajustar las mezclas de los monitores en el escenario.

Precio: Gratis

Visite la App Store en el siguiente enlace para obtener detalles sobre los requisitos del dispositivo y del sistema operativo.

Yamaha CL series digital mixing console firmware V4.0 or later

Punto de acceso Wi-Fi (preferiblemente con 802.11n o 802.11ac, capacidad de 5GHz, aunque 2.4GHz y 802.11g también funcionan)

Cable CAT5 (para conectar la consola a un punto de acceso Wi-Fi)

Descargar en App Store

* Please read privacy policy carefully before downloading and installing the StageMix.

* Apple, iPhone, iPod touch and iPad are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a service mark of Apple. Inc.

Características

The Best Listening Position is the Best Control Position

In many cases the console position is not the optimum place to be when mixing for live sound. In fact, space and other restrictions sometimes mean that the console ends up in the worst possible spot for listening and mixing.

Mixer Window

The main page of the StageMix is called the "Mixer" window. It shows the EQ curve, CUE and ON buttons, fader and level meters, and channel names for eight adjacent channels.Across the top of the screen, all Input, Mix and Matrix level meters and faders are displayed in blocks of eight. This is the "Navigation/Meter Bridge". Press any of these blocks to select which channels are viewed in the fader strips below.

SENDS ON FADERS

The color of this button matches those used on the M7CL console. [CUE] and [ON] buttons appear below, allowing the currently active Mix or Matrix bus to be Cued and turned On/Off.

Sends On Fader (Global Pre/Post Setting)

EQ Editing (PEQ)

One band of Parametric EQ can be adjusted at a time. Press one of the green circles to select the band, and it will be highlighted yellow. EQ bands in StageMix are labelled as follows:- HP = HPF (input channels only)- 1 = Low Band- 2 = Low-Mid Band- 3 = High-Mid Band- 4 = High Band

EQ Editing (GEQ)

The upper section of the GEQ setup screen shows GEQ curves and gain levels of all 31 bands. White dot indicates the level position of each band. You can set up each band level by faders shown below it. Settings can be done up to 10 bands at once. Slide the screen to select different bands.

Scene Memory

From this screen, the parameters on the console can be stored to the Scene Memory, which can also be recalled to the console when selected. Scene Titles and Comments that are shown on this screen can be edited easily by tapping on them.